NZXT Phantom 630 In Depth Look

 

 

As you can see you have a little window to look inside the case and a one of three 200 mm fans on the side panel.

 

Very spacious interior that is built with the same design as the H630 and Phantom 530.

 

The back side of the case.

 

NZXT has included their 10 port fan hub and ample room and ways to do cable management along with 2 places to mount SSDs to keep your drive bays open.

 

You have your front panel inputs and a vented and mesh openings for your exhaust fans.

 

One of the cool things I like about this case is the filters. All of them are removable and pretty easy to get to. These might be the hardest since they are attached to the fan but are completely removable.

 

USB 3.0,USB 2.0, headphone, mic, fan controller, power button, reset button, and control for lights in the back of case.

 

Door swings open to show four 5.25″ drive bays and a 200 mm fan pulling air in from the front along with an SD card reader.

 

What you are looking at is the removable mesh filter in the front of the case. all it does is snap into place so it is very easy to get to.

 

Rear bottom PSU filter

 

Front bottom filter that is held in place by magnets.

 

Next page is the NZXT Phantom 630 In Depth look continued with some components installed!